Scrape Lock
The WESTERN® Scrape Lock system locks the plow in any position you put it in to give you a cleaner scrape, especially while back dragging. With the plow locked in place, Scrape Lock gives you the performance of a larger plow without the extra weight and without the need to push any extra buttons.
To raise it, you will need to exceed 400 psi to raise the plow and overcome Scrape Lock.
Scrape Lock is a standard feature on the following snow plow models:
HTS™, DEFENDER™, IMPACT™ (Straight Blade), and IMPACT™ (V-Plow)
How to Activate & Engage Scrape Lock
Scrape Lock works without adding additional hydraulic circuits to your system. The lift arm is attached directly to the A-frame, keeping your plow lightweight while effectively holding the blade down. This design also allows the A-frame to freely float while in operation.
To activate Scrape Lock, the plow blade must remain all the way down, in float, before the relief valve engages.
Lower the plow blade all the way down so it is in contact with the ground.
Enter Float Mode—press the lower button on the handheld control and hold it for about a second to enter float mode.
Once the float light comes on, Scrape Lock is engaged.
