MVP 3™ Accessories

BACK DRAG EDGE
Ensure a clean scrape every time, when you back drag. The WESTERN back drag edge is built to be as rugged and durable as every other component of your plow. Constructed of 0.25″ abrasion-resistant steel and angled to maximize back dragging performance. This easy to install back drag edge is a key tool in any snowfighter’s kit.
*Back Drag Edge and Shoe Kits cannot be used simultaneously.
Part Number

CURB GUARDS
Go right up to the edge with bolt-on curb guards. Protect the outer edge of your MVP 3™ snow plow from wear when plowing along sidewalks and curbs. Made of cast metal, each curb guard effectively protects the outer edge of the plow.
*Curb Guards and Wing Extension Kits cannot be used simultaneously.
*10’6″ Model includes standard Curb Guards.
Part Number

BLADE STOP KIT
Protect your plow by ensuring heavy snow loads are distributed evenly with the blade stop kit. Made of reinforced, 0.188″ high-strength steel that reduces stress on the plow’s back iron and hydraulic rams for improved service life and performance. The easy-to-install kit comes with all of the required hardware.
Part Number

1/2" STEEL CUTTING EDGE
Made of abrasion resistant steel, the 1/2″ cutting edge gives your MVP 3 v-plow extra wearability by increasing the surface area at the point of contact.
Part Number

5/8" STEEL CUTTING EDGE
Made of abrasion resistant steel, the 5/8″ cutting edge gives your MVP 3 v-plow extra wearability by increasing the surface area at the point of contact.
Part Number

CARBIDE CUTTING EDGE
Abrasive surfaces and increased plowing speeds, often found in municipal and commercial applications, can increase the wear rate of standard steel cutting edges. Combat high replacement cycles with WESTERN carbide cutting edge kits for the 8′ 6″, 9′ 6″, and 10′ 6″ MVP 3.
Part Number

POLY CUTTING EDGE
Sensitive surfaces found in many residential and commercial applications require a more forgiving approach. Reduce the risk of property damage with Poly Cutting Edge Kits for the 8′ 6″, 9′ 6″, and 10′ 6″ MVP 3.
Part Number

WING EXTENSION KIT
Get more jobs done faster with wings. These plow wings increase the overall plowing width by one foot, add up to 30% more carrying capacity, and minimize snow spill-off. Made of 12-gauge steel with high strength steel ribs, these durable wings attach quickly and easily with a single pin.
*Wing Extension Kit and Curb Guards cannot be used simultaneously.
Part Number

10" RUBBER DEFLECTOR
Control the snow and always see where you’re going with optional deflectors. The 10″, 2-ply rubber snow deflector fits all MVP 3™ v-plow blades. Bolt on steel plates ensure proper positioning of the deflectors to keep your view clear and clean.
Part Number

18" RUBBER DEFLECTOR
Control even more snow with extended deflectors. Designed for the largest plows, extended deflectors ensure a clear view of your job site. The 18″, 2-ply rubber snow deflector fits all MVP 3™ blades. Bolt on steel plates ensure proper positioning of the deflectors to keep your view clear and clean.
Part Number

SHOE KIT
Protect your plow and the road, while extending the life of your cutting edge with an adjustable shoe kit. The cast iron construction and shape increases the surface contact area and helps glide over gravel and dirt at the correct height. Extending cutting edge and base angle life when plowing on rocky or abrasive surfaces.
*Shoe kit and back drag edges cannot be used simultaneously.
Part Number

EXTREME WEAR SHOE KIT
Protect your plow and the road, while extending the life of your cutting edge with an extreme wear shoe kit. Made of AR400 steel, adopted from municipal applications, this adjustable shoe kit increases the surface contact area and helps glide over gravel and dirt at the correct height. Extending cutting edge and base angle life when plowing on rocky or abrasive surfaces.
Part Number

GRILLE PLATE
Create clean and professional looking snowplow installations using the new stainless steel grille plate kits. Customizable 11-pin and 14-pin kits create harness storage locations for any application.
Part Number

SECURITY KIT - LED HEADLIGHTS
Thwart opportunistic theft of LED plow lights with the Security Kit featuring tamper-resistant hardware, mounting bracket, and installation tool.
Part Number

PRO-GRIP MOUNT KIT
This kit has grip! Kit contains adhesive-backed locking strips to secure the WESTERN® Solenoid Control and spreader controls to interior vehicle surfaces. Allows the control to be easily removed yet held firmly in place during plowing or spreading.
Part Number

EMERGENCY PARTS KIT - UltraMount®
Be prepared! These handy parts kits provide the high volume, Factory Original parts needed for emergency snow plow repairs. Packed in an easy-to-store WESTERN® factory original nylon duffle bag. This kit contains all the essentials for getting your UltraMount® plow up and running long enough to finish the job, and the bag has enough extra room for you to store any additional items you want, tailored to your needs.
Part Number

BALLAST RETAINER KIT
Safely secure ballast behind the rear axle of a vehicle using the WESTERN Ballast Retainer Kit.
Part Number

CONTROL CUP HOLDER MOUNT
Put a hard stop to juggling controls and cell phones. Functional and practical, the Control Cup Holder Mount lets you secure your WESTERN plow controls or your smartphone (not included) on a flexible gooseneck mount for optimal, customizable positioning. This compact, easy-to-install genuine WESTERN accessory is designed to fit firmly into most size cup holders in your vehicle.
Part Number

WESTERN® FACTORY ORIGINAL PAINT
Time to touch up your WESTERN® snowplow blade or black iron? Factory Original paint is formulated to match your original equipment and is available in spray or quart cans, in red or black, and topcoat or the primer-based undercoat for durable coverage.
Part Number

HIGH PERFORMANCE HYDRAULIC FLUID
Available in quart and gallon containers, WESTERN® high performance fluid is formulated to provide better viscosity in all temperatures. This means your plow will operate at the optimum level no matter what the weather conditions.
Part Number

DIELECTRIC GREASE
Don’t risk corrosion problems—use WESTERN® dielectric grease! Western Products recommends all owners consistently use our special formulation dielectric grease to protect all electrical connections in tough winter snow, ice and salt conditions.
Part Number

EXTREME DEFENSE™ GREASE
Protect and maintain moving components within snow and ice equipment including bearings, hinges and pivot bolts with EXTREME DEFENSE™ Grease. WESTERN’s specially designed blend is optimized for the cold, wet and dirty environment common to snow and ice management. Custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment investments for the long haul with no harmful environmental side effects. EXTREME DEFENSE Grease is available in cartridges, pails, totes and drums.