MVP PLUS™ Accessories
WING EXTENSION KIT
Get more jobs done faster with wings. These plow wings increase the overall plowing width by one foot, add up to 30% more carrying capacity, and minimize snow spill-off. Made of 12-gauge steel with high strength steel ribs, these durable wings attach quickly and easily with a single pin.
*Wing Extension Kits and Curb Guards cannot be used simultaneously.
Part Number
BLADE ANGLE STOP
Protect your plow by ensuring heavy snow loads are distributed evenly with the blade angle stop. Made of reinforced, 0.188″ high-strength steel that reduces stress on the plow’s back iron and hydraulic rams for improved service life and performance. The easy-to-install kit comes with all of the required hardware.
Part Number
CONVERSION KIT
This easy-to-use conversion kit allows you to attach a UniMount® plow to a vehicle equipped with an UltraMount® system vehicle mount. This kit is perfect if you have multiple snow plows, providing your fleet with versatility. It is also ideal when transferring an old UniMount plow to a late model vehicle.
Designed for use with all Standard, PRO, and 8′ 6″ MVP® UniMount plows. Not compatible with Sport Utility or Heavyweight models.
Part Number
CURB GUARDS
Go right up to the edge with bolt-on curb guards. Protect the outer edge of your snow plow from wear when plowing along sidewalks and curbs. Made of cast metal, each curb guard effectively protects the outer edge of the plow.
*Curb Guards and Wing Extension Kits cannot be used simultaneously.
Part Number
BACK DRAG EDGE
Ensure a clean scrape every time, when you back drag. The WESTERN back drag edge is built to be as rugged and durable as every other component of your plow. Constructed of 0.25″ abrasion-resistant steel and angled to maximize back dragging performance. This easy to install back drag edge is a key tool in any snowfighter’s kit.
*Curb Guards and Shoe Kits cannot be used simultaneously with the Back Drag Edge.
Part Number
1/2" CUTTING EDGE
This 1/2″ cutting edge fits the same hole pattern as the 3/8″ cutting edge that comes standard on your blade from the factory. Made of abrasion resistant steel, the 1/2″ cutting edge gives your MVP PLUS™ v-plow extra wearability by increasing the surface area at the point of contact.
Part Number
5/8" STEEL CUTTING EDGE
Made of abrasion resistant steel, the 5/8″ cutting edge gives your MVP PLUS v-plow extra wearability by increasing the surface area at the point of contact.
Part Number
CARBIDE CUTTING EDGE
Abrasive surfaces and increased plowing speeds, often found in municipal and commercial applications, can increase the wear rate of standard steel cutting edges. Combat high replacement cycles with WESTERN Carbide Accessory Cutting Edge Kits for the 8′ 6″ and 9′ 6″ MVP PLUS.
Part Number
POLY CUTTING EDGE
Sensitive surfaces found in many residential and commercial applications require a more forgiving approach. Reduce the risk of property damage with Poly Cutting Edge Kits for the 8′ 6″ and 9′ 6″ MVP PLUS.
Part Number
SHOE KIT
Protect your plow and the road, while extending the life of your cutting edge with an adjustable shoe kit. The cast iron construction and shape increases the surface contact area and helps glide over gravel and dirt at the correct height. Extending cutting edge and base angle life when plowing on rocky or abrasive surfaces.
Part Number
10" Rubber Deflector
Control the snow and always see where you’re going with optional deflectors. Our 10″, 2-ply rubber snow deflectors include bolt-on steel plates to ensure proper positioning of the deflectors to keep your view clear and clean.
Part Number
GRILLE PLATE
Create clean and professional looking snowplow installations using the new stainless steel grille plate kits. Customizable 11-pin and 14-pin kits create harness storage locations for any application.
Part Number
SECURITY KIT - LED HEADLIGHTS
Thwart opportunistic theft of LED plow lights with the Security Kit featuring tamper-resistant hardware, mounting bracket, and installation tool.
Part Number
CONTROL CUP HOLDER MOUNT
Put a hard stop to juggling controls and cell phones. Functional and practical, the Control Cup Holder Mount lets you secure your WESTERN plow controls or your smartphone (not included) on a flexible gooseneck mount for optimal, customizable positioning. This compact, easy-to-install genuine WESTERN accessory is designed to fit firmly into most size cup holders in your vehicle.
Part Number
PRO-GRIP MOUNT KIT
This kit has grip! Kit contains adhesive-backed locking strips to secure the WESTERN® Solenoid Control and spreader controls to interior vehicle surfaces. Allows the control to be easily removed yet held firmly in place during plowing or spreading.
Part Number
EMERGENCY PARTS KIT - UltraMount®
Be prepared! These handy parts kits provide the high volume, Factory Original parts needed for emergency snow plow repairs. Packed in an easy-to-store WESTERN® factory original nylon duffle bag. This kit contains all the essentials for getting your UltraMount® plow up and running long enough to finish the job, and the bag has enough extra room for you to store any additional items you want, tailored to your needs.
Part Number
BALLAST RETAINER KIT
Safely secure ballast behind the rear axle of a vehicle using the WESTERN Ballast Retainer Kit.
Part Number
WESTERN® FACTORY ORIGINAL PAINT
Time to touch up your WESTERN® snowplow blade or black iron? Factory Original paint is formulated to match your original equipment and is available in spray or quart cans, in red or black, and topcoat or the primer-based undercoat for durable coverage.
Part Number
HIGH PERFORMANCE HYDRAULIC FLUID
Available in quart and gallon containers, WESTERN® high performance fluid is formulated to provide better viscosity in all temperatures. This means your plow will operate at the optimum level no matter what the weather conditions.
Part Number
DIELECTRIC GREASE
Don’t risk corrosion problems—use WESTERN® dielectric grease! Western Products recommends all owners consistently use our special formulation dielectric grease to protect all electrical connections in tough winter snow, ice and salt conditions.
Part Number
EXTREME DEFENSE™ GREASE
Protect and maintain moving components within snow and ice equipment including bearings, hinges and pivot bolts with EXTREME DEFENSE™ Grease. WESTERN’s specially designed blend is optimized for the cold, wet and dirty environment common to snow and ice management. Custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment investments for the long haul with no harmful environmental side effects. EXTREME DEFENSE Grease is available in cartridges, pails, totes and drums.