CENTRAL POINT GREASE KIT
The Central Point Grease Kit provides easy access to grease points, simplifying preventative maintenance greasing that is essential to maximize bearing life.
The pre-wet system accessory allows the operator to activate deicing material by applying a liquid deicing agent directly on the material prior to leaving the hopper, providing you with increased material efficiency and superior ice control.
*Additional tank kits are not compatible with a vibrator
Loosen up with this Vibrator Kit to help move stubborn material and prevent bridging. Featuring a 200V DC vibrator motor in a metal housing, our vibrator will help prevent bridging and clogging, improving material flow so you can do your job faster and better.
Only compatible with one 50 gal pre-wet tank kit or one 100 gal pre-wet tank kit.
STAINLESS STEEL INVERTED V KIT
Reduce heavy startup loads on the drivetrain and bridging during operations with the optional inverted V. Made of 12 gauge 201 stainless steel, the inverted V is strong and corrosion resistant, for use in highly demanding environments. The inverted V is easy to assemble and install and will provide years of trouble free use.
STROBE LIGHT KIT
Make sure you’re seen, day or night, with our Strobe Lights for added visibility during operation. Encased in high impact plastic, this yellow LED strobe works in temperatures as cold as -20°F and will ensure that you’re seen in all but the worst of conditions. Make sure you spread safely with strobe light markers. Work Light (shown) not included.
WORK LIGHT KIT
See more to do more with the Work Light Kit for better visibility at the rear of your spreader at night. Encased in anodized aluminum, and good to less than minus 20 degrees, this LED work light will put over 1000 lumens where you need them, when you need them. The LEDs mean low amp draw, so you can easily use more than one (see our Additional Work Light Kit, PN 99732-1).
ADDITIONAL WORK LIGHT KIT
Add more lights to your spreader. Easily and conveniently add one, two, or even more lights with this kit. Each additional light puts another 1,000 lumens at your command and is easy to integrate with your original Work Light Kit (see PN 99505-1).
VEHICLE-SIDE HARNESS KIT
The Vehicle-Side Harness Kit contains components to replace harnessing on the truck or wire a second truck to operate the spreader.
CONTROL CUP HOLDER MOUNT
Put a hard stop to juggling controls and cell phones. Functional and practical, the Control Cup Holder Mount lets you secure your WESTERN spreader controls or your smartphone (not included) on a flexible gooseneck mount for optimal, customizable positioning. This compact, easy-to-install genuine WESTERN accessory is designed to fit firmly into most size cup holders in your vehicle (image featuring plow control).
Now compatible with spreader controls using a Spreader Control Adapter Plate, order separately (#82018).
HOLD DOWN KIT
This tie-down kit provides additional in-bed stability and security. The 4000 lb, high strength shipping straps allow you to add an extra measure of safety as you move tons of salt down the road. (Hoppers require bolting to the truck frame for proper operator safety.)
LICENSE PLATE KIT
Stay street legal with this illuminated license plate kit for your alternate license plate location. Providing convenient mount methods and lighting in a high impact plastic casing, the license plate kit allows you to move your license to a spot visible and legally compliant. Don’t leave without it.
SPREADER CONTROL ADAPTER PLATE
Gain the flexibility and easy installation benefits of the cup holder control mount with every spreader installation using the new Spreader Control Adapter Plate Kit. Kit contains a durable metal mounting plate and hardware.
Control Cup Holder Mount not included, order separately (#82007).
Don’t risk corrosion problems—use WESTERN® dielectric grease! Western Products recommends all owners consistently use our special formulation dielectric grease to protect all electrical connections in tough winter snow, ice and salt conditions.
EXTREME DEFENSE™ GREASE
Protect and maintain moving components within snow and ice equipment including bearings, hinges and pivot bolts with EXTREME DEFENSE™ Grease. WESTERN’s specially designed blend is optimized for the cold, wet and dirty environment common to snow and ice management. Custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment investments for the long haul with no harmful environmental side effects. EXTREME DEFENSE Grease is available in cartridges, pails, totes and drums.